What to do if your cell phone falls into the water?

[ad_1]

Leave your phone in rice? No way. You have to dry the device well with a cloth and leave it in a place with plenty of airflow. Also learn how to identify how protected your smartphone is. Cell phone in water Sergey Meshkov/Pexels The cell phone fell into the water or, by some accident, got soaked. But, calm down, you can try to save your smartphone. The Buying Guide brought together manufacturers’ recommendations with the best recommendations to try to resolve the problem. No putting the device in a pot of rice, huh? ✅Click here to follow the g1 Shopping Guide channel on WhatsApp See below what to do and what not to do if you spill water (or some other liquid) on your phone. And understand how protected your device is. What to do: Turn off the device immediately. “Moisture in the device can cause serious damage or corrosion to the motherboard,” advises Samsung. You may need to give it a bath: the manufacturers also indicate that it may be necessary to remove impurities that have entered the phone – such as sea water (which contains salt), swimming pool water (with chlorine) or residue from a drink. In this case, the brands’ recommendation is to immerse the cell phone in clean water for 1 to 3 minutes and rinse. Use a dry cloth to remove excess liquid from the outside. Without excess: Try to remove the remaining liquid by gently tapping the top of the device, with the USB connector pointing downwards. Put it to dry: Place the phone in a dry place with plenty of airflow – this could be near a fan. The water will gradually evaporate. Is it ready to use? If a moisture alert appears on the screen – which appears on iPhones and some Samsung Galaxy models – there may still be water remaining on the connector or cable pins. Keep the phone in a dry area with plenty of airflow for between 24 hours (Apple’s recommendation) and 48 hours (according to Motorola’s website). Use a wireless charger: if you need to retrieve some urgent information from your cell phone and it is discharged, an alternative – if compatible – is to use a wireless charger, to avoid using cables. Don’t forget to dry the back of the phone first. Not every water exposure situation is the same. If the problem is not resolved, it is recommended to seek technical assistance from the cell phone manufacturer for a technical evaluation. What not to do: No rice: Don’t put your smartphone in a container or bag of rice. “Small particles of rice can cause damage,” says Apple, in a note on its support site. Do not use the cable when the device is wet. As a result, the connector or cable pins can corrode and cause permanent damage or stop functioning, Apple points out. Don’t use accessories: Don’t even think about using an external heat source, such as a hairdryer, or compressed air to try to remove the liquid. The hot wind from the dryer can, for example, detach the equipment’s back cover and other internal components. No cotton swabs: There is always the temptation to use a cotton swab or toothpick to dry your cell phone: cotton residue (or other material) can get stuck inside the speaker holes or the USB-C connector (in the case of Androids and iPhone 15) or Lightning (for iPhones 14 and earlier). And that’s another potential damage. How protected is your device? Older phones had moving parts such as covers, memory card drawers, and removable batteries. And they were more susceptible to moisture damage. The most modern devices have few moving parts and everything is “locked” into a single piece. This type of design helps prevent water from entering, but still leaves some spaces free: the openings for the speakers, the microphone, the drawer for the operator’s SIM card and the power cable connector. Smartphone manufacturers started to certify their equipment using IP classification. This is a code created by the IEC (International Electrotechnical Commission, in English) that helps identify the protection and resistance of devices against dust, impact and liquids. The first digit of the rating tells you the protection against solid objects. The second digit, water protection: What do the numbers in IP protection mean? More expensive devices are water resistant, rated IP67 (maximum depth of 1 meter for up to 30 minutes) or IP68 (maximum depth of 1.5 meters for up to 30 minutes). In other words, you can take a quick dip to take a photo under the pool without being afraid of damaging the device. But, if time passes, this same “dive” can actually damage the device and lead to the loss of the warranty. “The device may become soaked”, adds Samsung. “Exposure to conditions outside these parameters is not covered by the warranty”, comments Motorola. More basic cell phones have an IP53 or IP54 rating, which guarantees protection against dust, splashes or splashes of water. An example with this protection is the line Redmi, from Xiaomi – but these can’t dive. ‘Old’ iPhone: which version is still worth buying? See below a list of seven smartphones with IP68 protection available in internet stores. Prices for the devices started at R$ 2,200 and reached up to R$ 11,000 from online sellers consulted in March. Apple iPhone 14 Apple iPhone 15 Pro Max Asus Zenfone 10 Motorola Edge 40 Motorola Edge 40 Neo Samsung Galaxy A55 Samsung Galaxy S24 Ultra This report was produced with total editorial independence by our team of specialized journalists and collaborators. If the reader chooses to purchase a product from the links provided, Globo will be able to earn revenue through commercial partnerships. We clarify that Globo does not have any control or responsibility regarding the eventual purchasing experience, even through the links provided. Questions or complaints regarding the product purchased and/or the purchase, payment and delivery process must be directed directly to the responsible retailer. Cell phone duel: Galaxy S24 x iPhone 15

[ad_2]

Source link